MICROFLEX 150(part2) is a flexible cable replacementfor the .141 semi-rigid delivering the same electrical performance. The standard hybrid brass housing nut and stainless steel SMA mating end feature a thickwall construction for durability through repeated mating cycles. The coupling nut retracts for visual mating of center conductors. The connector design is such that the core and center conductor becomes an integral part of the SMA connector. The use of MICROFLEX 150 eliminates complicated three plane drawings required with complex semi-rigid designs often allowing one part number to replace several different cables. The flexibility of MICROFLEX 150 also eliminates cracked or broken solder joints caused by misalignment of semi-rigid cables during mating while retaining the electrical performance of 141 semi-rigid. 

MICROFLEX 165(part2) is designed for isolation and stability under demanding conditions. It features a totally non-magnetic construction with a fused laminated PTFE core. The shielding characteristics are unsurpassed in a flexible cable. MICROFLEX 165 has a finished diameter of .165 inch while the SMA connectors are PASSAVATED stainless steel with a thick wall design for durability and repeated mating cycles. The inner conduc-tor and core became an integral part of SMA connector for better VSWR and electrical characteristics. MICROFLEX 165 cable assemblies are designed to provide maximum durability, shielding and electrical performance under extreme handling along with vibration and enviromental exposure. Microflex 165 Cable Assemblies may be weather proofed or armored coated 

MICROFORM 088(part2) is a handformable replacement for the .086 semi-rigid cable. Easily formed by hand, they retain their shape with no spring back. Both are available as pre-made assemblies with SMA, SSMA, SMB or SMC connectors or as bulk cable. MICROFORM 088 cables are economical replacements for custom fabricated semi-rigid cables. 
 

MICROFORM 139(part2) is a hand formable replacement for the .141 semi-rigid cable. Easily formed by hand, they retain their shape with no spring back. Both are available as pre-made assemblies with SMA, SSMA, SMB or SMC connectors or as bulk cable. MICROFORM 139 cables are economical replacements for custom fabricated semi-rigid cables. 
 

MICROFLEX 155 MlCROFLEX 155 is a new cost effective direct replacement for many of the common RG cables in use today. light duty test cable. For applications requIrIng flexibility at an economical price. MICROFLEX I55 Is the cable of choice. The cable is designed for applications requiring improved electrical performance over the RG cables at a cost-effective price. MICROFLEX 155 replaces cables such as the RG142, RG223, RG400,  or RG58. MICROFLEX 155 is double shielded. A double barrier outer conductor for improved shieldingat hIgh frequency. Useable to 18 GHz and improved electrical characteristics over the RG cables they replaced at a very economical price compared to other modern hi-tech cables. 

MICROPORE 190 is a new, inexpensive high performance, super low loss cable for applications requiring flexibility and the lowest possible loss at an economical price; MICROPORE 190 is the cable of choice. The cable is non-magnetic and has a double barrier outer conductor for improved shielding. It also features an air-induced dielectric for low loss at high frequency (*up to 18GHz) 

MICROFLEX 098 MICROFLEX 098 Flexible Cable Assemblies. These Cable Assemblies are available with 1.85mm “V” Male Connectors with performance to 65 GHz (“V” is Regesterd Trademark of the ANRITSU Company) Contact UNITED MICROWAVE PRODUCTS INC. Phone 310-320-1244 Fax 310-320-9729 Email umpinc@pacbell.net for other types of Precision Cables .